Safety Course Library

Convergence Safety Courses were developed by leveraging content and guidance from certified safety professionals at an integrated pulp and paper mill. Our content is based on best practices in mill safety and Code of Federal Regulations (CFRs) set out by the Occupational Health and Safety Administration (OSHA). Take a moment to browse our course library below and experience our superior content and course design.

Aerial Work Platforms

12 minutes / 29 CFR 1910.67

Don't get hung up working overhead. This computer-based training module describes basic types of aerial work platforms and how to work with them safely. It provides an overview of safety requirements, controls, preparation, work rules, hazards, and other safety precautions related to elevated platforms. This course discusses Extensible Boom Platforms, Aerial Ladders, Articulating Boom Platforms, and Vertical Towers.

Asbestos Awareness

20 minutes / 29 CFR 1910.1001

Dispel some of the common myths about asbestos by educating your team about Asbestos Containing Materials (ACM) and how to work safely around them. This computer-based training module describes the most common types of asbestos as well as the hazards asbestos may present. It provides an overview of the history of asbestos use, exposure limits, detection, prevention, and regulation. It also covers some of the potential effects of long-term exposure including asbestosis, lung cancer, and mesothelioma.

Bloodborne Pathogens

13 minutes / 29 CFR 1910.1030

This computer-based training module defines bloodborne pathogens and describes common methods of transmission. It also provides details related to exposure risks, exposure prevention, and steps to take in the event of exposure to blood or potentially infected material. Hepatitis B, HIV, proper hygiene, and waste disposal are also discussed.

Confined Space Awareness

29 minutes / 29 CFR 1910.146

Don't get stuck in a tight spot. This computer-based training module provides information on confined space identification, hazardous atmospheres, physical hazards, entrance and exit hazards, hazard prevention, and permits. Other topics discussed include atmospheric testing, energy isolation, engulfment, moving or rotating equipment, and rescue procedures.

Electrical Safety General Awareness

18 minutes / 29 CFR 1910.331-1910.355

Spark some discussion about electrical safety with this course that will help your team recognize, evaluate, and avoid electrical hazards. Topics covered on this computer-based training module include personal protective equipment related to electrical safety and OSHA requirements for working on equipment, as well as electrical injuries such as shocks, burns, electrocutions, and falls.

Ergonomics

20 minutes / OSHA Ergonomic Guidelines

Understand how to recognize and reduce the stress on your body from your daily work environment. This computer-based training module discusses musculoskeletal disorders (MSD) and prevention techniques, including engineering and administrative controls. Motion-based, physical, environmental, and psychological risk factors are also covered.

Fall Prevention and Protection

10 minutes / 29 CFR 1910.66 App C

Slips, trips, and falls are often the most common causes of injuries and occupational fatalities. Raise awareness and lower the likelihood of these incidents with this computer-based training module focusing on fall prevention, fall injury reduction, personal fall arrest systems, and fall protection nets.

Fire Extinguisher Safety

14 minutes / 29 CFR 1910.157

We see them hanging on the wall every day but most people know very little about fire extinguishers. Use this computer-based training module to educate your team on the fire triangle, the types of fires that can occur in the workplace, and how and when to use a fire extinguisher. This course also describes when to evacuate and provides some proper maintenance tips for fire extinguishers.

Fire Safety

23 minutes / 29 CFR 1910 Subpart L

Be prepared to keep yourself and your team safe in the event of a fire. This computer-based training module covers the nature of fire, preventative and protective measures, fire sprinklers, smoke detectors, alarms, extinguishers, evacuation, and the "stop-drop and roll" technique. Fire classifications and basic fire extinguisher use is also discussed.

Formaldehyde Awareness

14 minutes / 29 CFR 1910.1048

Breathe easy with a better understanding of working safely around formaldehyde. This computer-based training module provides information on the history and production of formaldehyde as well as its uses, sources, exposure regulations, the types of formaldehyde, and the effects of exposure to formaldehyde gas.

Hand and Power Tools

23 minutes / 29 CFR 1910 Subpart P

The power to recognize and avoid injury is right at your fingertips. This computer-based training module includes information on hand tools, power tools, general tool safety, maintenance, guards, best practices, and operating guidelines. The module also covers safety related to electrical, pneumatic, hydraulic, liquid fuel, and powder-actuated power tools.

Hand Safety

12 minutes / 29 CFR 1910.132

We can think of at least ten critical reasons you should use this course to protect your hands. This computer-based training module covers the physiology of the hand, guidelines for hand safety, specific hand safety situations, and proper personal protective equipment selection. Safety concerns discussed also include: protecting your hands from moving machine parts, extreme temperatures, chemicals, physical stress, and infection.

Hazard Communication

16 minutes / 29 CFR 1910.1200

Get a better understanding of the importance of container labeling for a safer workplace. This computer-based training module discusses OSHA's Hazard Communication Standard (HCS) and the requirements for a written Hazard Communication Program (HCP). Learn about the four factors of chemical exposure and additional topics such as workplace chemicals, chemical exposure, chemical labeling, Material Safety Data Sheets (MSDS), and methods of controlling physical and health hazards.

Hearing Conservation

18 minutes / 29 CFR 1910.95

Protect one of your most valuable senses with a better understanding of the anatomy of the ear, how sound works, how the ear interprets sound, the effects of noise on hearing, and annual audiometric testing. Learn how to avoid occupational hearing loss by choosing and using the right hearing protection for your job, such as ear muffs and ear plugs.

Hydrogen Sulfide Awareness

13 minutes / 29 CFR 1910 Subpart Z

Sometimes what you can't smell can hurt you. Protect yourself and your team with this critical information that raises awareness of what Hydrogen Sulfide (H2S) is and discusses exposure risks and effects, toxicity, ignition, detection, prevention, and evacuation.

Ladder Safety

23 minutes / 29 CFR 1910 Subpart D

With this course, you get the step-by-step basics of ladder safety. Topics discussed on this computer-based training module include information on the types of ladders you may find in your workplace as well as ladder construction, ladder selection, height requirements, weight capacity, hazardous conditions, inspections, ladder setup, use, storage, and maintenance.

Laser Safety

16 minutes / STD 01-05-001 - PUB 8-1.7

Use this computer-based training module to learn about working safely around Light Amplification by Stimulated Emission of Radiation (LASERs). This course covers laser light, how lasers work, types of lasers, laser classifications, laser hazards, low-power laser hazards, and laser pointer safety guidelines.

Lead Awareness

15 minutes / 29 CFR 1910.1025

Before you cut, grind, or burn through any painted surface at work or at home, better make sure you know what you're dealing with. Protect yourself and your team from unintentional lead exposure with this computer-based training module that defines what lead is and provides information on its history and usage, reduction efforts, lead exposure, effects, detection and treatment, personal protective equipment (PPE), and prevention methods.

Lockout - Tagout

18 minutes / 29 CFR 1910.147

Don't count on luck, count on the lock. Protect yourself and your team from unintentional exposure to all types of hidden energy with this computer-based training module that describes hazardous energy types and energy control procedures, including preparation, shutdown, isolation, lockout, stored energy check, verification, and release of lockout. Additional topics include lockout hardware and administration of an Energy Control Program (ECP).

Pedestrian Safety

12 minutes / 29 CFR 1910.178

Don't set foot on the plant floor or walk into the warehouse without this basic training on safely walking in an active work zone. Learn about blind spots, the importance of establishing eye contact, and staying within designated walkways. This computer-based training module covers pedestrian safety guidelines, mobile equipment guidelines, and forklift driver guidelines.

Personal Protective Equipment

18 minutes / 29 CFR 1910.132

Every day, someone decides to give up their sight, hearing, fingers, toes, or worse to save a few seconds of effort. Sure it can be inconvenient and uncomfortable, but properly using personal protective equipment (PPE) sure is better than many unfortunate alternatives. Use this computer-based training module to educate yourself and your team on head protection, eye and face protection, hand protection, foot protection, respiratory protection, and hearing protection.

Radiation Safety

20 minutes / 29 CFR 1910.97, 29 CFR 1910.1096

The myths surrounding radiation exposure may be great for a Hollywood screenplay, but they won't help you work safely around radiation at your facility. Use this computer-based training module to learn about ionizing and non-ionizing radiation, gamma rays, isotope encapsulation, radiation-based sensor usage, radiation strength, and exposure minimization.

Storm Water Pollution Prevention

21 minutes / EPA Regulations

Do your part to keep our rivers, streams, and lakes clean and stay compliant. This computer-based training module provides an overview of the storm water pollution problem and the regulatory measures in place to help avoid pollution from rainwater runoff. Topics discussed include physical and operational best management practices (BMPs), housekeeping, pollution prevention, material management practices, spill prevention and response, and waste management. Catch basins, secondary containment, flow diversion, and bioretention are also covered in this material based on Environmental Protection Agency (EPA) regulations.